This is the first article in a series to implement a neural network from scratch. We will set things up in terms of software to install, knowledge we need, and some code to serve as backbone for the remainder of the series.
In this short series I will be guiding you on how to implement a neural network from scratch, so that you really understand how they work.
By the time we are done, your network will be able to read images of handwritten digits and identify them correctly, among other things.
Your network will receive an image like
and will output a
Not only that, but we will also do a bunch of other cool things with our networks.
It is incredible that nowadays you can just install tensorflow or pytorch or any other machine learning framework, and with just a couple of lines you can train a neural network on some task you pick. The downside to using those libraries is that they teach you little about how the models actually work, and one of the best ways to understand how something works is by dissecting it, studying it and assembling it yourself.
When it comes to programming, I will assume you are comfortable with the basic concepts of Python. I will not be using features that are too advanced, but every now and then I might use modules from the Python Standard Library. If you don't know those modules, that's fine. Reading the description from the documentation should be enough to bring you up to speed! I also have a series of blog articles to help you write better Python code, so take a look at that if you feel the need.
Throughout the series I will be assuming you are familiar with the general idea of how neural networks work. If you have no idea what a neural network is, it is with great pleasure that I recommend you watch 3blue1brown's video(s).
Being familiar with matrix algebra and a bit of calculus (knowing what derivatives are and understanding them) will make it easier for you to follow along, but you don't really need to be a master of these subjects in order to implement a neural net: the first time I implemented a neural network I didn't know matrix algebra nor derivatives. I will be giving intuitive explanations of what is going on at each step, and then proceed to justify them with the calculations needed. Feel free to skip the formal calculations if you are in a rush, but bear in mind that going through those is one of the things that really helps the knowledge sink in.
In this article we will be setting up for the remainder of the series. First, I will be covering what needs to be installed. Then we will be taking a look at some of the more basic things we can already implement: we will be modelling and initialising layers, the backbone of any neural network.
The code for this article, and for the future articles of the series, can be found in this GitHub repository.
In order to follow along you will need to have Python 3 installed (I will be running all my code in Python 3.9, which is my main installation at the time of writing this article) and you also need to have NumPy installed.
NumPy is a Python library for numerical computations and we will be using thoroughly
for its matrix algebra capabilities:
turns out it is much easier to implement a neural network if you do most of your
operations in bulk, instead of doing everything by hand with
for loops and whatnot.
(Which is what I did the first time, and let me tell you it was not pretty...)
Installing NumPy should be effortless with
python -m pip install numpy
but check out their instructions if you need help with the installation.
Every now and then, you might trip up on something that isn't working as intended... I know that can be frustrating, but don't forget that Google exists for this type of situation.
Whenever I am doing a project, I usually spend a bit of time thinking about the components I am going to need and how they will interact. Then I need to pick a place to start, and I tend to start some place where I will be producing code that works, so that I can actually see progress happening in terms of result, instead of just seeing the number of lines of code increase.
The first thing we could try to do is create a representation for a layer of a neural network and implement a way to initialise it, so that we have something palpable to play with right from the get-go. But what is a layer in a neural network?
A neural network can be thought of as a very basic emulation of the human brain. I am no neurologist, but from my understanding our neurons are connected to each other and they communicate with each other by sending signals, so in a way we can think of our neurons as entities that can be “on” or “off”. Not only that, but each neuron depends on some other neurons (the ones it is connected to) to know whether it should be “on” or “off”.
Our neural networks will be emulating that behaviour, but instead of having the neurons all mixed up, we will line them up neatly in what we call layers. In the figure below we show four layers, and the neurons of consecutive layers are connected by thin lines:
We will also determine that a neuron can only be connected to the neurons of the next layer and to the neurons of the previous layer, instead of allowing connections between arbitrary neurons. The only exceptions are the neurons of the leftmost layer, as those are the input neurons: they accept the data we give them, and the neurons of the rightmost layer, as those are the output neurons: they return some result.
In the example image we have ten output neurons labelled 0 through 9 and some number of input neurons (784 if you watch the video).
The “on” and “off” state of each neuron will actually be a floating point number and the neurons of the input layer will be receiving their states as the input to the network. Then, the states of each following layer will be computed from the states of the previous layer. In order to compute the state of a single neuron, what you do is take the states of all the \(m\) neurons of the preceding layer:
\[ x_1, ~ x_2, ~ x_3, ~ \cdots, ~ x_m ~~~ ,\]
and then add them up, after weighting them:
\[ w_1x_1 + w_2x_2 + w_3x_3 + \cdots + w_mx_m ~~~ .\]
Think of this as a vote, in the sense that each neuron of the previous layer is casting their vote (\(x_j\)) about whether or not this neuron should be “on”, but then you care more about what some neurons say and less about what other neurons say, so you give a weight (\(w_j\)) to each "opinion".
If we colour the connections depending on the weight they carry, we can have an image like the one below:
Then, you take into account your opinion about the vote, your own bias (\(b\)), and add that into the mix:
\[ b + w_1x_1 + w_2x_2 + w_3x_3 + \cdots + w_mx_m ~~~ .\]
The final step is to take the result of that vote and plug it in a function, that we call the activation function, that processes the result of the vote and computes the state the neuron will be in. If we are using an activation function named \(f\), then the state of this neuron would be
\[ f(b + w_1x_1 + w_2x_2 + w_3x_3 + \cdots + w_mx_m) ~~~ .\]
This is what we will be doing, but instead of computing all of these sums by hand for each neuron, we will be using matrix algebra to represent things in bulk:
In doing so, we will have a weight matrix \(W\) and a bias vector \(b\) that models the connections between two consecutive sets of neurons. If the preceding set of neurons has \(m\) neurons and the next set of neurons has \(n\) neurons, then we can have \(W\) be a \(n \times m\) matrix, and \(b\) be a column vector of length \(n\), and then \(W\) and \(b\) can be interpreted as follows:
Then, if the preceding layer produced a vector \(x\), and if \(F\) is the activation function being used, we can compute the next set of states by performing the calculation
\[ F(Wx + b) ~~~,\]
where \(Wx\) is a matrix multiplication. If you look at each element of the column vector \(Wx\), you will see the multiplications and addition I showed above for a single neuron, except now we are doing them in bulk. The \(+ b\) sums the bias, and then we apply the activation function \(F\) to everything at the same time.
This process by which we take the states of the previous neurons and compute the states of the next set of neurons is often dubbed the forward pass.
Therefore we conclude that we need to be able to create these matrices of weights and these bias vectors in order to model a layer in a neural network, so let us get that off the way.
In order to create the weight matrices and the bias vectors we just need to know their dimensions, so we can define two functions (one for the weight matrices and another for the bias vectors) and take the dimensions as arguments:
import numpy as np def create_weight_matrix(nrows, ncols): return np.zeros((nrows, ncols)) def create_bias_vector(length): return np.zeros((length, 1))
In the code above you can see that I created a column vector as a matrix with only one column. You could create the bias vector as a plain vector, but I did it like so in order to keep the implementation as close as possible to the mathematical calculations we will be doing later, and it helps to have everything consistent.
You can go ahead and create a weight matrix:
>>> create_weight_matrix(2, 4) array([[0., 0., 0., 0.], [0., 0., 0., 0.]])
This is not extremely interesting, and also not very helpful when dealing with neural networks. In general, these weight matrices and bias vectors are initialised with small, random values. When you are more comfortable around these topics, you can look for scientific papers on what are the best practices for deciding what type of randomness you want to use and how small the numbers should be, but I will be doing something that has worked well for me and is fairly sensible: we will sample the weights and the bias, so that they are drawn from a normal distribution with mean 0 and a standard deviation that decreases as the size of the matrix/vector increases.
Thankfully, in NumPy you can generate normally distributed random numbers with ease:
import numpy as np def create_weight_matrix(nrows, ncols): return np.random.default_rng().normal(loc=0, scale=1/(nrows*ncols), size=(nrows, ncols))
Now let us check how a random matrix would look like:
>>> create_weight_matrix(2, 4) array([[-0.09040462, -0.00485385, -0.08010303, 0.29271109], [ 0.12528501, -0.08750708, -0.26472923, 0.13410931]])
For the bias vectors, we can be a little bit lazy and recall that a column vector is just a matrix with a single column:
def create_bias_vector(length): return create_weight_matrix(length, 1)
Now that we have the weights and the bias that model the connections between different layers, we can actually see what it looks like to give some input to our network.
Imagine we have 4 numbers as input, the column vector \((1, 0, 0, 0)^T\), and let us assume that the next layer will have only 2 neurons. If that is the case, then our weight matrix should have 2 rows (one for each neuron we want to update the state of) and 4 columns (one for each neuron that is contributing to the update of the states):
>>> W = create_weight_matrix(2, 4) >>> b = create_bias_vector(2) >>> x = np.array((1, 0, 0, 0), ndmin=2).T >>> x array([, , , ]) >>> np.dot(W, x) + b array([[-0.67662439], [ 0.18410246]]))
The only thing missing is the activation function. We will start with a simple activation function called Leaky Rectified Linear Unit, or Leaky ReLU for short. Code speaks louder than words, so here's the implementation:
def leaky_relu(x, leaky_param=0.1): return np.maximum(x, x*leaky_param)
If a number is positive, the Leaky ReLU does nothing and if it is negative, it multiplies it by the parameter of the function:
>>> np.dot(W, x) + b array([[-0.67662439], [ 0.18410246]]) >>> leaky_relu(np.dot(W, x) + b) array([[-0.06766244], [ 0.18410246]])
We now have some of the building blocks in order to get a layer working, so another simple thing we could do is actually put them together.
The implementation becomes simple to follow and to understand if we define
a custom class for an object that we will call
Layer and that will
represent the connections and the flow of information between a column
of neurons and the next:
that is, instead of having the layer specifically represent the neurons
of each vertical column, we deal with what happens in between two columns
If we represent our data in this way, then we do not need to special case the input layer or the output layer in any way, and that simplifies the coding process a lot.
When we create a layer (of connections), we need to tell it three things:
With that information we can already initialise a layer properly:
class Layer: def __init__(self, ins, outs, act_function): self.ins = ins self.outs = outs self.act_function = act_function self._W = create_weight_matrix(self.outs, self.ins) self._b = create_bias_vector(self.outs)
We can also write a little helper method that computes the forward pass in our layer, a method that takes a set of neuron states and computes the next set of neuron states:
class Layer: # ... def forward_pass(self, x): return self.act_function(np.dot(self._W, x) + self._b)
This is exactly the same as the
leaky_relu(np.dot(W, x) + b) line we had above
in the REPL, but this time we are writing it in the general setting of an
We can also include a little demo in our code:
if __name__ == "__main__": """Demo of chaining layers with compatible shapes.""" l1 = Layer(2, 4, leaky_relu) l2 = Layer(4, 4, leaky_relu) l3 = Layer(4, 1, leaky_relu) x = np.random.uniform(size=(2, 1)) output = l3.forward_pass(l2.forward_pass(l1.forward_pass(x))) print(output)
Try running your script and see what output you get. One of the times I ran it, I got
> python nn.py [[-0.07763001]]
Now that we have the backbone for the neural network in place, we can take a look at what we have coded so far and insert the docstring comments we forgot to add because we were in such a rush to get something working. My docstring-writing skills aren't very sharp, but perhaps what I wrote can serve as inspiration for you.
Currently we have a file that spans for 39 lines. It doesn't look like much, but on the other hand we have advanced quite a lot.
In the next article we will be aggregating layers in a class for a neural network and we will be looking at how neural networks learn.
These are all the articles in this series:
Espero que tenhas aprendido algo novo! Se sim, considera seguir as pisadas dos leitores que me pagaram uma fatia de pizza 🍕. O teu pequeno contributo ajuda-me a manter este projeto grátis e livre de anúncios aborrecidos.