My new ebook “Comprehending Comprehensions” is on pre-sale and 40% off!

## Watch out for recursion | Pydon't 🐍

Recursion is a technique that you should have in your programming arsenal, but that doesn't mean you should always use recursion when writing Python code. Sometimes you should convert the recursion to another programming style or come up with a different algorithm altogether.

(If you are new here and have no idea what a Pydon't is, you may want to read the Pydon't Manifesto.)

# Introduction

In this Pydon't I am going to talk a little bit about when and why recursion might not be the best strategy to solve a problem. This discussion will entail some particularities of Python, but will also cover broader topics and concepts that encompass many programming languages. After this brief discussion, I will show you some examples of recursive Python code and its non-recursive counterparts.

Despite what I said I'll do, don't take me wrong: the purpose of this Pydon't is not to make you dislike recursion or to say that recursion sucks. I really like recursion and I find it very elegant.

# Watch out for recursion

Now that you know what is the purpose of this Pydon't, let me mention some things that can influence the suitability of recursion to solve problems.

## RecursionError

The first thing we will discuss is the infamous recursion depth limit that Python enforces.

If you have no idea what I am talking about, then either

• you never wrote a recursive function in your life, or
• you are really, really good and never made a mistake in your recursive function definitions.

The recursion depth limit is something that makes your code raise a RecursionError if you make too many recursive calls. To see what I am talking about, just do the following in your REPL:

>>> def f():
...     return f()
...
>>> f()
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "<stdin>", line 2, in f
File "<stdin>", line 2, in f
File "<stdin>", line 2, in f
[Previous line repeated 996 more times]
RecursionError: maximum recursion depth exceeded
>>>

In many cases, this limit helps, because it helps you find recursive functions for which you did not define the base case properly.

There are, however, cases in which $$1000$$ recursive calls isn't enough to finish your computations. A classical example is that of the factorial function:

>>> def fact(n):
...     if n == 0:
...             return 1
...     return n*fact(n-1)
...
>>> fact(10)
3628800
>>> fact(2000)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "<stdin>", line 5, in fact
File "<stdin>", line 5, in fact
File "<stdin>", line 5, in fact
[Previous line repeated 995 more times]
File "<stdin>", line 2, in fact
RecursionError: maximum recursion depth exceeded in comparison

Our function is properly defined but by default Python does not allow us to make sufficient recursive calls.

If you must, you can always set your own recursion depth:

>>> import sys
>>> sys.setrecursionlimit(3000)
>>> fact(2000)
33162... # (omitted for brevity)
>>> sys.getrecursionlimit()
3000

Just be careful with it. I never tried, but you are likely not to be interested in having Python run out of memory because of your obscenely large amount of recursive calls.

Hence, if your function is such that it will be constantly trying to recurse more than the recursion depth allowed, you might want to consider a different solution to your problem.

## No tail recursion elimination

In some programming languages, the factorial function shown above could be tweaked -- so as to perform a tail call -- and that would prevent some problems while saving memory: tail calls happen when the recursive call is the very last thing that is done inside the function, which more or less means that you do not need to keep any information whatsoever about the context you are in when you recurse.

In the factorial function above, after recursing with fact(n-1) we still have to perform a multiplication before returning from the function. If we rewrote the function to carry the partial factorial as an accumulator, we could have a factorial function that performs tail calls:

>>> def fact(n, partial=1):
...     if n <= 1:
...             return partial
...     return fact(n-1, n*partial)
...
>>> fact(10)
3628800

As you can see, the very last thing done inside the fact function is to call itself, so in theory Python could “forget everything about its surroundings” when making the recursive call, and save a lot of memory in the process.

In practice, Python does not do this intentionally, and I refer you to the two articles on the Neopythonic blog (by Guido van Rossum) in the references to read more on why Python does not have such a feature.

Converting recursive functions into tail recursive functions is an interesting exercise and I challenge you to do so, but you won't get speed gains for it. However, it is very easy to remove the recursion of a tail recursive function, and I will show you how to do it in the examples below.

## Branching overlap

Another thing to take into account when considering a recursive solution to a problem is: is there going to be much overlap in the recursive calls?

If your recursive function branches in its recursive calls and the recursive calls overlap, then you may be wasting plenty of time recalculating the same values over and over again. More often than not this can be fixed easily, but just because a problem probably has a simple solution, it doesn't mean you can outright ignore it.

A classical example of recursion that leads to plenty of wasted computations is the Fibonacci sequence example:

def fibonacci(n):
if n <= 1:
return n
return fibonacci(n-1) + fibonacci(n-2)

A simple modification to this function shows that there are many recursive calls being made:

call_count = 0
def fibonacci(n):
global call_count
call_count += 1
if n <= 1:
return n
return fibonacci(n-1) + fibonacci(n-2)

print(fibonacci(10))
print(call_count)   # 177

If your function is more involved, then the time you waste on recalculations can become unbearable.

Something else to take into consideration when writing recursive solutions to your problems is that recursive solutions are inherently depth-first in nature, whereas your problem might warrant a breadth-first solution.

This is unlikely to be a large concern, but it just goes to show that sometimes, even though a solution has a very clear recursive solution, you are better off with not implementing a purely-recursive solution.

A very good example of this distinction popped up when I solved the water bucket riddle: I wanted to write code that solved (a more generic version of) that riddle where you have a bucket that can hold A litres, another one that holds B litres, and you have to move water around to get one of the buckets to hold exactly T litres. The solution can be easily expressed in recursive terms, but my implementation actually used a while loop and a BFS algorithm.

If you don't know what this means, the best thing to do is to google it. For example, visit the Wikipedia pages on Depth-first Search and Breadth-first Search. In a short and imprecise sentence, Depth-First Search (DFS) means that when you are traversing some structure, you prioritise exploring in depth, and only then you look around, whereas in Breadth-First Search (BFS) you first explore the level you are at, and only then go a level deeper.

# Examples in code

I will now show some recursive code that can incur in some of the problems mentioned above, and will also share non-recursive versions of those same pieces of code.

## Factorials

The toy example of the factorial is great because it lends itself to countless different implementations, and the ideas that these implementations exhibit can then be adapted to more complex recursions.

The main characteristic here is that the recursion of the factorial is a “linear” recursion, where each call only performs a single recursive call, and each recursive call is for a simpler problem.

The vanilla recursion follows:

def factorial(n):
if n <= 1:
return 1
return n * factorial(n-1)

Like we have seen above, we could use an accumulator to write a tail recursive version of the factorial, even thought Python won't optimise that in any way:

def factorial(n, partial=1):
if n <= 1:
return partial
return factorial(n-1, n*partial)

Now that we have this function written in a tail recursive way, we can actually remove the recursion altogether following a simple recipe:

def factorial(n):
partial = 1
while n > 1:
n, partial = n-1, n*partial
return partial

This is a generic transformation you can do for any tail recursive function and I'll present more examples below.

Still on the factorial, because this is a linear recursion (and a fairly simple one, yes), there are many ways in which this function can be rewritten. I present a couple, pretending for a second that math.factorial doesn't exist:

import math
def factorial(n):
return math.prod(i for i in range(1, n+1))

import functools, operator
def factorial(n):
return functools.reduce(operator.mul, [i for i in range(1, n+1)])

def factorial(n):
fact = 1
for i in range(1, n+1):
fact *= i
return fact

If you are solving a problem and come up with different solutions, don't be afraid to try them out.

## More on tail recursion

Let me show you a couple of simple recursive functions, their tail recursive equivalents and then their non-recursive counterparts. I will show you the generic transformation, so that you too can rewrite any tail recursive function as an imperative one with ease.

### List sum

You can implement your own sum recursively:

def sum(l):
if not l:
return 0
return l[0] + sum(l[1:])

If you carry a partial sum down the recursive calls, you can make this tail recursive:

def sum(l, partial=0):
if not l:
return partial
return sum(l[1:], l[0] + partial)

From the tail recursive function to the while solution is simple:

def sum(l):
partial = 0
while l:
l, partial = l[1:], l[0] + partial
return partial

Notice what happened:

• the default value of the auxiliary variable becomes the first statement of the function;
• you write a while loop whose condition is the complement of the base case condition;
• you update your variables just like you did in the tail recursive call, except now you assign them explicitly; and
• after the while you return the auxiliary variable.

Of course there are simpler implementations for the sum, the point here is that this transformation is generic and always works.

### Sorting a list

Here is another example where we sort a list with selection sort. First, “regular” recursion:

def selection_sort(l):
if not l:
return []
m = min(l)
idx = l.index(m)
return [m] + selection_sort(l[:idx]+l[idx+1:])

Now a tail recursive version:

def selection_sort(l, partial=None): # partial=[] is bad!
if partial is None:
partial = []
if not l:
return partial
m = min(l)
idx = l.index(m)
selection_sort(l[:idx]+l[idx+1:], partial + [m])

In the above we just have to be careful with something: the default value of partial is supposed to be the empty list, but you should avoid mutable types in your arguments' default values, so we go with None and then the very first thing we do is set partial = [] in case it was None.

Finally, applying the recipe, we can remove the recursion:

def selection_sort(l):
partial = []
while l:
m = min(l)
idx = l.index(m)
l, partial = l[:idx]+l[idx+1:], partial + [m]
return partial

## Traversing (a directory)

The Depth-first versus Breadth-first distinction is more likely to pop up when you have to traverse something.

In this example, we will traverse a full directory, printing file names and file sizes. A simple, purely recursive solution follows:

import pathlib

def print_file_sizes(path):
"""Print file sizes in a directory."""

path_obj = pathlib.Path(path)
if path_obj.is_file():
print(path, path_obj.stat().st_size)
else:
for path in path_obj.glob("*"):
print_file_sizes(path)

If you apply that function to a directory tree like this one,

 - file1.txt
- subdir1
| - file2.txt
| - subdir2
| - file3.txt
| - subdir3
| - deep_file.txt

then the first file you will see printed is deep_file.txt, because this recursive solution traverses your file-system depth first. If you wanted to traverse the directory breadth-first, so that you first found file1.txt, then file2.txt, then file3.txt, and finally deep_file.txt, you could rewrite your function to look like the following:

import pathlib

def print_file_sizes(dir):
"""Print file sizes in a directory, recurse into subdirs."""

paths_to_process = [dir]
while paths_to_process:
path, *paths_to_process = paths_to_process
path_obj = pathlib.Path(path)
if path_obj.is_file():
print(path, path_obj.stat().st_size)
else:
paths_to_process += path_obj.glob("*")

This example that I took from my “Truthy, Falsy, and bool” Pydon't uses the paths_to_process list to keep track of the, well, paths that still have to be processed, which mimics recursion without actually having to recurse.

## Keeping branching in check

### Overlaps

When your recursive function branches out a lot, and those branches overlap, you can save some computational effort by saving the values you computed so far. This can be as simple as having a dictionary inside which you check for known values and where you insert the base cases.

call_count = 0

fibonacci_values = {0: 0, 1: 1}
def fibonacci(n):
global call_count
call_count += 1

try:
return fibonacci_values[n]
except KeyError:
fib = fibonacci(n-1) + fibonacci(n-2)
fibonacci_values[n] = fib
return fib

print(fibonacci(10))
print(call_count)   # 19

Notice that this reduced the recursive calls from 177 to 19. We can even count the number of times we have to perform calculations:

computation_count = 0

fibonacci_values = {0: 0, 1: 1}
def fibonacci(n):
try:
return fibonacci_values[n]
except KeyError:
global computation_count
computation_count += 1
fib = fibonacci(n-1) + fibonacci(n-2)
fibonacci_values[n] = fib
return fib

print(fibonacci(10))
print(computation_count)   # 9

This shows that saving partial results can really pay off!

### Writing recursive branching as loops

To show you how you can rewrite a recursive, branching function as a function that uses while loops we will take a look at another sorting algorithm, called merge sort. The way merge sort works is simple: to sort a list, you start by sorting the first and last halves separately, and then you merge the two sorted halves.

Written recursively, this might look something like this:

def merge(l1, l2):
result = []
while l1 and l2:
if l1[0] < l2[0]:
h, *l1 = l1
else:
h, *l2 = l2
result.append(h)

result.extend(l1)  # One of the two lists is empty,
result.extend(l2)  # the other contains the larger elements.
return result

def merge_sort(l):
"""Sort a list recursively with the merge sort algorithm."""

# Base case.
if len(l) <= 1:
return l
# Sort first and last halves.
m = len(l)//2
l1, l2 = merge_sort(l[:m]), merge_sort(l[m:])
# Now put them together.
return merge(l1, l2)

If you don't want to have all this recursive branching, you can use a generic list to keep track of all the sublists that are still to be sorted:

def merge(l1, l2):
"""Merge two lists in order."""

result = []
while l1 and l2:
if l1[0] < l2[0]:
h, *l1 = l1
else:
h, *l2 = l2
result.append(h)

result.extend(l1)  # One of the two lists is empty,
result.extend(l2)  # the other contains the larger elements.
return result

def merge_sort(l):
"""Sort a list with the merge sort algorithm."""

# Save all sorted sublists.
# Keep track of sublists that need sorting:
to_sort = [l]
while to_sort:
# Pick a list to be sorted.
lst, *to_sort = to_sort
# Base case.
if len(lst) <= 1:
else:
# Split in halves to sort each half.
m = len(lst) // 2
to_sort.append(lst[:m])
to_sort.append(lst[m:])

# Merge all the sublists.
# Factored out the merge to keep this short.

return already_sorted[0]

In this particular example, my translation of the merge sort to a non-recursive solution ended up being noticeably larger than the recursive one. This just goes to show that you need to judge all situations by yourself: would this be worth it? Is there an imperative implementation that is better than this direct translation? The answers to these questions will always depend on the programmer and the context they are in.

This also shows that the way you think about the problem has an effect on the way the code looks: even though this last implementation is imperative, it is a direct translation of a recursive implementation and so it may not look as good as it could!

# Conclusion

Here's the main takeaway of this article, for you, on a silver platter:

“Pydon't recurse mindlessly.”

This Pydon't showed you that:

• Python has a hard limit on the number of recursive calls you can make and raises a RecursionError if you cross that limit;
• Python does not optimise tail recursive calls, and probably never will;
• tail recursive functions can easily be transformed into imperative functions;
• recursive functions that branch can waste a lot of computation if no care is taken;
• traversing something with pure recursion tends to create depth first traversals, which might not be the optimal way to solve your problem; and
• direct translation of recursive functions to imperative ones and vice-versa will probably produce sub-optimal code, so you need to align your mindset with what you want to accomplish.

If you liked this Pydon't be sure to leave a reaction below and share this with your friends and fellow Pythonistas.

Also, don't forget to subscribe to the newsletter so you don't miss a single Pydon't!

# References

Online references last consulted on the 16th of February of 2021.

Espero que tenhas aprendido algo novo! Se sim, considera seguir as pisadas dos leitores que me pagaram uma fatia de pizza 🍕. O teu pequeno contributo ajuda-me a manter este projeto grátis e livre de anúncios aborrecidos.